How to Set Sky Control on TV Philco
If you have a Philco TV and a Sky remote control, you may need to configure the control so that it works properly with your TV. In this blog, we will show you step by step how to make this configuration simply and quickly.
Step 1: Check the remote control batteries
Before you start configuring the control, make sure the batteries are working properly. Otherwise replace with new batteries.
Step 2: Find the Philco TV code
To configure SKY control on Philco TV, you will need the correct TV code. This code may vary according to your TV model. To find the correct code, follow the instructions below:
- Access the Sky website and look for the support section;
- Look for Philco TV code in the remote control instruction manual;
- If you don’t find the code, contact Sky’s support for help.
Step 3: Configuring the remote control
Now that you have the correct code of PHILCO TV, follow the instructions below to configure the remote control of Sky:
- Press and hold the “TV” button on Sky’s remote control;
- While keeping the “TV” button pressed, type the PHILCO TV code;
- After entering the code, release the “TV” button;
- Test the remote control to verify that the configuration was successful. Try to turn on and off the TV, adjust the volume, change channels, among other functions.
If the remote control works properly, congratulations! You successfully configured Sky’s control on your Philco TV. Otherwise, repeat the configuration process using another Philco TV code.
Remember that codes can vary according to the Philco TV model and Sky’s remote control. Therefore, it is important to check the correct information before making the configuration.
We hope this blog has been useful for setting SKY control on your Philco TV. If you have any questions or problems, do not hesitate to contact SKY support for additional assistance.