How to put glass adhesive

Stickers are a great option for decorating glasses, whether they are windows, doors or even decoration objects. In this article, we will teach you step by step how to put glass adhesive easily and without complications.

Materials Necessary

• Glass Adhesive
• Water
• Neutral detergent
• Rubber Highway
• Soft Sponge
• Clean cloth

Step by Step

1. Glass cleaning

The first step is to ensure that the glass is clean and free from any dirt or residue. To do this, mix water and neutral detergent in a bucket and use the soft sponge to clean. Make sure you rinse the glass well to remove all soap.

2. Sticker Positioning

With clean and dry glass, position the adhesive in the desired location. If the sticker is large, you can use adhesive tape to temporarily and ensure that it is aligned.

3. Adhesive Application

With the sticker positioned, moisten the surface of the glass with water. This will help to avoid bubbles and facilitate the sliding the adhesive. Then remove the protective paper from the adhesive and paste it into the glass.

4. Bubble removal

With the adhesive glued to the glass, use the rubber squeegee to remove any air bubbles. Start from the center of the sticker and push toward the edges. Make sure to make firm and constant movements.

5. FINAL FINISH

After removing all bubbles, use a clean cloth to dry the glass and ensure that the adhesive is well fixed. Make soft movements to avoid damaging the adhesive.

Now that you have learned how to put glass adhesive, release your creativity and decorate your environments in a personalized way. Remember to properly follow the instructions and take care not to damage the glass during the process.

We hope this article has been useful. If you have any questions, leave it in the comments below. Good decoration!